Skip Navigation


Radiation Protection Dosimetry Advance Access originally published online on January 26, 2006
Radiation Protection Dosimetry 2006 118(3):325-330; doi:10.1093/rpd/nci369
This Article
Right arrow Full Text
Right arrow Full Text (PDF)
Right arrow All Versions of this Article:
118/3/325    most recent
nci369v1
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in ISI Web of Science
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrow Search for citing articles in:
ISI Web of Science (1)
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Vano, E.
Right arrow Articles by Guibelalde, E.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Vano, E.
Right arrow Articles by Guibelalde, E.
Social Bookmarking
Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

© The Author 2006. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oxfordjournals.org

Influence of patient thickness and operation modes on occupational and patient radiation doses in interventional cardiology

E. Vano1,2,*, L. Gonzalez1, J. M. Fernandez1,2, C. Prieto2 and E. Guibelalde1

1 Radiology Department, Complutense University, 28040 Madrid, Spain
2 Medical Physics Service, San Carlos University Hospital, 28040 Madrid, Spain

* Corresponding author: eliseov{at}med.ucm.es

Received July 19, 2005, amended September 6, 2005, accepted November 7, 2005

Patient and staff dose values in an interventional cardiology laboratory for different operational modes and several patient thicknesses (from 16 to 28 cm, simulated using polymethylmethacrylate) are presented. When increasing patient thicknesses and depending on fluoroscopy and cine modes, occupational doses can increase >30 times the baseline level. Scatter dose rates at the cardiologist's position with no radiation protective tools ranged from 1 to 14 mSv h–1 for fluoroscopy, and from 10 to 47 mSv h–1 during cine acquisition. Patient entrance surface air kerma rates increased by nearly 3 and staff dose rates by up to 2.6 when fluoroscopy was moved from the low to the high mode, for a typical 20 cm thickness. The respective increase factors were 6 and 4.2 when patient thickness rose from 16 to 28 cm, and by 10 and 8.3, when comparing cine acquisition with the low fluoroscopy mode. The knowledge of typical dose rates for each X-ray system in use in catheterisation laboratories is essential in order to optimise protection of patients and staff.


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?


This article has been cited by other articles:


Home page
 RadiologyHome page
E. Vano, L. Gonzalez, J. M. Fernandez, and Z. J. Haskal
Eye Lens Exposure to Radiation in Interventional Suites: Caution Is Warranted
Radiology, September 1, 2008; 248(3): 945 - 953.
[Abstract] [Full Text] [PDF]

Home page
 Radiat Prot DosimetryHome page
A. Mesbahi, P. Mehnati, A. Keshtkar, and N. Aslanabadi
COMPARISON OF RADIATION DOSE TO PATIENT AND STAFF FOR TWO INTERVENTIONAL CARDIOLOGY UNITS: A PHANTOM STUDY
Radiat Prot Dosimetry, July 11, 2008; (2008) ncn188v1.
[Abstract] [Full Text] [PDF]


Disclaimer:
Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.