Radiation Protection Dosimetry Advance Access originally published online on February 3, 2006
Radiation Protection Dosimetry 2005 117(1-3):195-198; doi:10.1093/rpd/nci715
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Protocols for dosimetry and patient reference levels
Quality Assurance Reference Centre, Unit 9 Kingfisher Way, Silverlink Business Park, Wallsend, Tyne and Wear NE28 9ND, UK
* Corresponding author: keith.faulkner{at}nhs.net
Doses in radiology should be as low as reasonably achievable. In order to compare practice in different centres it is necessary to compare patient doses. This can only be undertaken if dosimetry studies are similar. In order to facilitate comparisons, the DIMOND consortium developed a patient dosimetry protocol. Reference doses have been proposed to identify centres where optimisation studies would be of benefit. Whilst reference doses have been established for common radiographic and fluoroscopic examinations, little research has been undertaken in the area of digital radiology, partly owing to the rapid technological changes occurring in digital and interventional radiology. Dosimetry data obtained by the DIMOND research project were compared with data from published literature. Data for various digital and interventional radiology procedures were reviewed. Proposals are made for reference doses. There is obviously a need for standardised approaches to patient dosimetry, which should be recorded in the hospital's information system.
![]()
CiteULike
Connotea
Del.icio.us What's this?
This article has been cited by other articles:
![]() |
K. Faulkner The DIMOND project and its impact on radiation protection Radiat Prot Dosimetry, December 1, 2005; 117(1-3): 3 - 6. [Abstract] [Full Text] [PDF] |
||||
