Skip Navigation


Radiation Protection Dosimetry Advance Access originally published online on April 13, 2005
Radiation Protection Dosimetry 2005 113(3):342-351; doi:10.1093/rpd/nch465
This Article
Right arrow Full Text
Right arrow Full Text (PDF)
Right arrow All Versions of this Article:
113/3/342    most recent
nch465v1
Right arrow Alert me when this article is cited
Right arrow Alert me if a correction is posted
Services
Right arrow Email this article to a friend
Right arrow Similar articles in this journal
Right arrow Similar articles in ISI Web of Science
Right arrow Similar articles in PubMed
Right arrow Alert me to new issues of the journal
Right arrow Add to My Personal Archive
Right arrow Download to citation manager
Right arrow Search for citing articles in:
ISI Web of Science (1)
Right arrowRequest Permissions
Google Scholar
Right arrow Articles by Porstendörfer, J.
Right arrow Articles by Gründel, M.
Right arrow Search for Related Content
PubMed
Right arrow PubMed Citation
Right arrow Articles by Porstendörfer, J.
Right arrow Articles by Gründel, M.
Social Bookmarking
 Add to CiteULike   Add to Connotea   Add to Del.icio.us  
What's this?

© The Author 2005. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oupjournals.org

Scientific Note

Fraction of the positive 218Po and 214Pb clusters in indoor air

J. Porstendörfer2, P. Pagelkopf1 and M. Gründel1,*

1 Institute of Physical Chemistry, Georg-August-University Göttingen, Tammannstrasse 6, D-37077 Göttingen, Germany
2 Am Hirtenberg 8, D-37136 Waake, Germany

* Corresponding author: mgruend2{at}gwdg.de

Received December 7, 2004, amended January 10, 2005, accepted January 30, 2005

The fraction of the positively charged unattached radon decay products, 218Po and 214Pb in indoor air was determined by model calculations. The results of the calculations were confirmed by measurements in a test chamber (volume: 8 m3). The fraction of both radionuclides depends on the attachment parameter (S1) and the neutralisation rate ({nu}) in room air. The total removal parameter considers the attachment rate to aerosol particles (X), plate-out rate to room surfaces (qf) and the ventilation rate ({nu}) ({lambda}1: decay constant of 218Po). The S1-value of room can be determined by measurement of the concentration of the unattached 218Po clusters () and radon (C0). The neutralisation rate ({nu}) in environmental air depends mainly on the ion production rate. The influence of the relative humidity in the range 30–95% (temperature: 20°C) is negligible. In addition, equal neutralisation rates for 218Po and 214Pb could be derived. In room air with ion production rates between 5 and 500 nC kg–1 h–1 mainly generated by the alpha emitters of radon, thoron and their short-lived decay products, the fractions for positive 218Po clusters vary between 55 and 17% and for 214Pb clusters between 53 and 14%. For a typical average concentration of radon (50 Bq m–3) and thoron (10 Bq m–3) in homes, 48% of 218Po clusters and 45% of 214Pb clusters are positively charged.


Add to CiteULike CiteULike   Add to Connotea Connotea   Add to Del.icio.us Del.icio.us    What's this?




Disclaimer: Please note that abstracts for content published before 1996 were created through digital scanning and may therefore not exactly replicate the text of the original print issues. All efforts have been made to ensure accuracy, but the Publisher will not be held responsible for any remaining inaccuracies. If you require any further clarification, please contact our Customer Services Department.